Audio Delay - Denon AVR-1712 Owner's Manual

Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® XT" setting (vpage 55) is "Manual".
Setting items
Adjust Channel q Select the speaker tone adjustment method.
Correct the tone of each All : Adjust the tone of all speakers together.
speaker. L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® XT.
• "Curve Copy" is displayed after Audyssey ® Auto Setup has been
performed.
• When you select "Curve Copy" and press
Audyssey Flat?" prompt is displayed. Select either "Yes" or "No", and
ENTER
press
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Default" and press
settings.
the "Return settings to the default?" prompt
is displayed. Select either "Yes" or "No", and
ENTER
press
BD
Default settings are underlined.
Setting details
ENTER
, the "Set EQ curve to
.
ENTER
,
.
RESTORER
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use RESTORER.
Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.
• "RESTORER" settings are stored for each input source.
• This item default setting for "iPod" is "Mode3". All others are set to "OFF".
• When set to something other than "OFF",
• This cannot be set when the surround mode is set to "DIRECT" or "PURE DIRECT".

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" (vpage 63) is set to
"ON" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode"
"Game".
57
Setting details
is displayed.
Default settings are underlined.
Setting details
(vpage 71) is set to "Auto" or
Audio Adjust