Quick Select Function - Denon AVR-1911 Owner's Manual

ENGLISH

Quick select function

It is also possible to save three settings for ZONE2.
n Saving the settings
1
Set the items below to the settings
you want to save.
q Input source (vpage 39)
w Volume (vpage 39)
2
Switch ZONE SELECT to
"ZONE2".
The remote control unit switches to the
operating mode for ZONE2.
3
Press and hold the desired QUICK SELECT button until
"Memory" appears on the display.
The current settings will be memorized.
GQuick select defaultsH
Input Source
QUICK SELECT 1 BD
QUICK SELECT 2 SAT/CBL
QUICK SELECT 3 DOCK
n Recalling the settings
1
ZONE SELECT
Switch to
"ZONE2".
The remote control unit switches to the
operating mode for ZONE2.
2
Press QUICK SELECT at which the
settings you want to call out are
saved.
Naming quick select settings
See "Quick Select Name" (vpage 59).
40
Volume
–40dB
–40dB
–40dB