How To Make Detailed Settings; Menu Map - Denon AVR-1712 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
Menu
Audio Adjust Surr.Parameter
Information Tone
Setup Wizard AudysseySettings
System Setup Manual EQ
Input Setup RESTORER
Audio Delay
Items that only need to be set
once
Set these for example upon purchase.
Once these items are set, there is
no need to set them again unless
the speaker layout or the connected
speakers have been changed.
BD
Setting items Detailed items
Audio Adjust Surr.Parameter
Tone
Audyssey Settings
Manual EQ
RESTORER
Audio Delay
Information Status
Audio Signal
HDMI Information
Auto Surround
Quick Select
Preset Channel
Setup Wizard
System Setup Speaker Setup
HDMI Setup
Audio Setup
ZONE2 Setup
Option Setup
Language
Input Setup Auto Preset
Preset Skip
Preset Name
Displayed items of the "Input
Input Assign
Setup" menu differs, depending on
Video
the selected input source.
Input Mode
Rename
Source Level
Playback Mode
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Makes Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic
Volume ® settings.
Uses the graphic equalizer to adjust the tone of each speaker.
Expands the low and high frequency components of compressed audio to enable
richer audio playback.
Compensates for incorrect timing between video and audio.
Shows information about current settings.
Shows information about audio input signals.
Displays the HDMI input/output signals and HDMI monitor information.
Displays the settings stored for the auto surround mode.
Displays the settings stored for the Quick Select function.
Shows information about tuner preset channels.
Perform the installation, connection, and setup procedures to prepare the unit for
operation following guidance.
Sets the speaker size and distance, the channel level, etc.
Makes settings for HDMI video/audio output.
Makes settings for audio playback.
Makes settings for audio playback in a ZONE2 system.
Makes various other settings.
Sets the language for display the menu on the TV screen.
Uses the auto preset function to program radio stations.
Sets the preset memories that you do not want to display when tuning.
Assigns name to a preset memory.
Changes input connector assignment.
Makes the video settings.
Sets the audio input mode and decode mode.
Changes the display name for this source.
Adjusts the playback level of the audio input.
Makes settings for iPod source playback.
47
Description Page
53
55
55
57
57
57
58
58
58
58
58
58
C 4
60
63
64
65
65
67
69
69
69
70
71
72
72
72
73