Memory Information Screen; Cpu Information Screen - Dell PowerEdge 2970 Hardware Owner's Manual

Memory Information Screen

Table 2-3 lists the descriptions for the information fields that appear on the Memory Information
screen.
Table 2-3. Memory Information Screen
Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
Redundant Memory
(Disabled default)
Node Interleaving

CPU Information Screen

Table 2-4 lists the options and descriptions for the information fields that appear on the CPU
Information screen.
Table 2-4. CPU Information Screen
Option
64-bit
Core Speed
Bus Speed
Virtualization Technology
(Disabled default)
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the system memory speed.
Displays the amount of video memory.
Specifies whether system memory tests are run at system boot.
Options are Enabled and Disabled.
Enables or disables the redundant memory feature. When set to
Spare Mode, the first rank of memory on each DIMM is reserved
for memory sparing. See "Memory Sparing Support" on page 92.
Redundant memory feature is disabled if the Node Interleaving
field is enabled.
If this field is enabled, memory interleaving is supported if a
symmetric memory configuration is installed. If this field is set to
disabled (the default), the system can support Non-Uniform
Memory architecture (NUMA) (asymmetric) memory
configurations.
NOTE:
The Node Interleaving field must be set to Disabled when
using the redundant memory feature.
Description
Specifies if the installed processor(s) support 64-bit extensions.
Displays the clock speed of the processor(s).
Displays the bus speed of the processor(s).
Displays when the processor(s) support Virtualization Technology.
Enabled permits virtualization software to use Virtualization
Technology incorporated in the processor design. This feature can
only be used by software that supports Virtualization Technology.
Using the System Setup Program
41