Appears if "SYS" is 135 mmHg or above and/or "DIA" is 85 mmHg
or above in the morning weekly average.
S'affiche si « SYS » est égale ou supérieure à 135 mmHg et/ou « DIA »
égale ou supérieure à 85 mmHg dans la moyenne hebdomadaire du
matin.
Wird angezeigt, wenn im wöchentlichen Morgenmittelwert „SYS"
135 mmHg oder mehr und/oder „DIA" 85 mmHg oder mehr beträgt.
Viene visualizzato se la pressione sistolica "SYS" è pari o superiore
a 135 mmHg e/o la pressione diastolica "DIA" è pari o superiore a
85 mmHg nella media mattutina settimanale.
Aparece si "SYS" es 135 mmHg o superior y/o "DIA" es 85 mmHg o
superior en el promedio semanal de mañana.
Verschijnt als "SYS" 135 mmHg of hoger is en/of "DIA" 85 mmHg of
hoger is in het ochtendweekgemiddelde.
Отображается, если средние утренние значения за неделю «SYS»
— 135 мм рт. ст. и выше и/или «DIA» — 85 мм рт. ст. и выше.
Sabah haftalık ortalamasında "SYS" 135 mmHg ya da üstünde
olduğunda ve/veya "DIA" 85 mmHg ya da üstünde olduğunda
görünür.
To know how to calculate weekly averages, refer to section 10 of
the Instruction Manual 1.
Pour savoir comment calculer les moyennes hebdomadaires, se
reporter à la section 10 du Mode d'emploi 1.
Wie die wöchentlichen Mittelwerte berechnet werden, ist in
Abschnitt 10 der Gebrauchsanweisung 1 beschrieben.
Per sapere come calcolare le medie settimanali, consultare la
sezione 10 del manuale di istruzioni 1.
Para saber cómo calcular mediciones semanales, consulte la
sección 10 del manual de instrucciones 1.
Zie paragraaf 10 van de gebruiksaanwijzing 1 voor aanwijzingen
hoe u het wekelijkse gemiddelde kunt berekenen.
О том, как рассчитываются средние значения за неделю, см.
раздел 10 этого руководства по эксплуатации 1.
Haftalık ortalamaların nasıl hesaplanacağını öğrenmek için, Kullanım
Kılavuzu 1'de bölüm 10'a bakın.
.
30
Need help?
Do you have a question about the M7 Intelli IT AFib and is the answer not in the manual?
Questions and answers
how do I set the truread timer interval on the M7 INTELL AFIB
To set the TruRead timer interval on the Omron M7 Intelli IT AFib, refer to the section titled “Setting the TruRead Mode Interval” (Настройка интервала режима TruRead). By default, the interval is set to 30 seconds. You can adjust this setting in the device menu by following the instructions in that section. Exact steps are not provided in the context.
This answer is automatically generated