Advertisement
Quantities vary by screen size:
Screens smaller than 80" viewing width = 1
Screens 80" to 96" viewing width = 2
Screens over 96" viewing width = 3
Quantity of 1. Only for screens
smaller than 80" viewing width
SNAP STUD
QUANTITY INCLUDED ________
FRAME BRACKET
Quantities vary by screen size
Screens smaller than 80" viewing width = 3
Screens 80" to 96" viewing width = 4
Screens over 96" viewing width = 6
QUANTITY INCLUDED ________________________________
FRAME ASSEMBLY
1. Unpack the frame parts from the carton. DO NOT
unroll the screen surface at this time.
2. Slide the frame pieces together at corners. (Note:
Frame assembly holes may not appear to fit properly
at the corners until all fasteners have been attached.
Once fasteners are attached, the frame corners will
be drawn in for a proper fit.) Secure frame pieces
with #10 screws provided. Do not tighten screws
until all are started, then tighten. See Figure 1.
NOTE: The frame pieces are labeled "top" and "bottom".
Be sure the frame pieces are assembled according to the
labels. This will ensure the snap pattern on the frame and
screen surface will match.
LARGE WALL BRACKET (47" LONG)
QUANTITY INCLUDED __________
Installation screws not included
SMALL WALL BRACKET (8" LONG)
QUANTITY INCLUDED __________
Installation screws not included
#10 SCREW
QUANTITY INCLUDED ________
Screens with High Power viewing surface quantity = 2
Screens with 2-piece side frame rails quantity = 2
Screens 10' to 16' viewing width = 2
QUANTITY INCLUDED ________________________________
FIGURE 1. REAR VIEW
1
USE INSTALLATION
METHOD NUMBER __________
HIGH POWER FRAME BRACKET
SNAP STUD
TOP
SNAP STUD
#10 BLACK SCREW
SIDE
BOTTOM
SIDE
Advertisement
