High Power; Frame Assembly - Da-Lite CINEMA CONTOUR SCREEN Instruction Book

Quantities vary by screen size:
Screens 80" and smaller viewing width = 1
Screens over 80" to 96" viewing width = 2
Screens over 96" viewing width = 3
Quantity = 1. Only for screens
80" and smaller viewing width.
#10 SCREW
QUANTITY INCLUDED ________

HIGH POWER

Screens with High Power
Screens with 2-piece side frame rails quantity = 2
QUANTITY INCLUDED ________________________________

FRAME ASSEMBLY

1. Unwrap the frame pieces. Assemble frame pieces on padding
material or other soft, clean surface. This will help keep the
frame clean and protect it from scratches.
2. Slide the frame pieces together at corners (Note: Frame
assembly holes may not appear to fit properly at the corners
until all fasteners have been attached. Once fasteners are
attached, the frame corners will be drawn in for a proper fit.)
Secure frame pieces with #10 screws provided. Do not
tighten screws until all are started, then tighten. See Figure 1.
NOTE: The frame pieces are labeled "top" and "bottom". Be sure
the frame pieces are assembled according to the labels. This will
ensure the snap pattern on the frame and screen surface will
match.
3. Attach the eight snap studs to the back of the frame in the
predrilled holes.
LARGE WALL BRACKET (47" LONG)
Installation screws not included
SMALL WALL BRACKET (8" LONG)
Installation screws not included
® FRAME BRACKET
® quantity = 2
QUANTITY INCLUDED __________
QUANTITY INCLUDED __________
SCREWS
SNAPS
FIGURE 1 (REAR VIEW)
1
SNAP STUD
QUANTITY INCLUDED ________
USE INSTALLATION
METHOD NUMBER __________