Defining Advanced System Settings - D-Link xStack DXS-3227 Web/Installation Manual

Defining Advanced System Settings

The Mode Page allows network managers to enable Jumbo Frames on the device. Jumbo Frames enable the
transportation of identical data in fewer frames. This ensures less overhead, lower processing time, and fewer
interruptions.
To define advanced system settings:
1. Click System > General > Mode. The Mode Page opens.
Figure 29: Mode Page
The Mode Page contains the following field:
•
Enable Jumbo Frames — Indicates if Jumbo Frames are enabled on the device. Maximum packet length
supported is 10Kb. The possible field values are:
–
Checked — Enables Jumbo Frames on the device.
–
Unchecked — Disables Jumbo Frames on the device.
2. Check the Enable Jumbo Frames field.
3. Click . Jumbo frames are enabled on the device.
Note
New settings will take effect only after resetting the device
Page 63
Managing Device Information
Defining Advanced System Settings