Defining Ip Addresses - D-Link xStack DXS-3227 Web/Installation Manual

DXS/DWS 3200 Series User Guide

Defining IP Addresses

The IP Interface Page contains fields for assigning IP addresses. Packets are forwarded to the default IP when
frames are sent to a remote network. The configured IP address must belong to the same IP address subnet of
one of the IP interfaces.
To define an IP interface:
1. Click Basic Setup > IP Configuration > IP Addressing > IP Interface. The IP Interface Page opens:
Figure 106:IP Interface Page
The IP Interface Page contains the following fields:
•
IP Address — Displays the currently configured IP address.
•
Mask — Displays the currently configured IP address mask.
•
Interface — Displays the interface used to manage the device.
–
Dynamic — Indicates that the IP address is dynamically created.
–
Static — Indicates the IP address is a static IP address.
•
Type — Indicates if the IP address has been configured statically or added dynamically
•
Remove — Removes the selected IP address from the interface. The possible field values are:
–
Checked — Removes the IP address from the interface.
–
Unchecked — Maintains the IP address assigned to the Interface.
2. Click . The Add IP Interface Page opens:
Page 172
.