The TACACS+ Page also contains the following fields:
•
Host IP Address — Defines the TACACS+ Server IP address.
•
Priority — Defines the order in which the TACACS+ servers are used. The field range is 0-65535. The
default is 0.
•
Source IP Address — Defines the device source IP address used for the TACACS+ session between the
device and the TACACS+ server.
•
Authentication Port (0-65535) — Defines the port number via which the TACACS+ session occurs. The
default port is port 49.
•
Timeout for Reply— Defines the amount of time in seconds that passes before the connection between the
device and the TACACS+ times out. The field range is 1-1000 seconds.
•
Single Connection — Maintains a single open connection between the device and the TACACS+ server.
The possible field values are:
–
Checked — Enables a single connection.
–
Unchecked — Disables a single connection.
•
Status — Indicates the connection status between the device and the TACACS+ server. The possible field
values are:
–
Connected — Indicates there is currently a connection between the device and the TACACS+ server.
–
Not Connected — Indicates there is not currently a connection between the device and the TACACS+
server.
•
Remove — Removes TACACS+ server. The possible field values are:
–
Checked — Removes the selected TACACS+ server.
–
Unchecked — Maintains the TACACS+ servers.
2.
Click
. The TACACS+ Page opens.
Figure 46: Add TACACS+ Host Page
3.
Define the Host IP Address, Priority, Source IP Address, Key String, Authentication Port, Timeout for Reply,
and Single Connection.
4.
Click
. The TACACS+ server is defined, and the device is updated.
Page 93
Configuring Device Security
Configuring Management Security