•
Ingress Committed Information Rate (CIR)
value is
Police
Single
•
Ingress Committed Burst Size (CBS)
value is
.
Single
•
— Action assigned to incoming packets exceeding the CIR. This field is only relevant when
Exceed Action
the
value is
Police
Single
–
Drop — Drops packets exceeding the defined CIR value.
–
Remark DSCP — Remarks packets' DSCP values exceeding the defined CIR value.
3.
Define the fields.
4.
Click
. The policy is defined, and the device is updated.
Attaching Policies to Interfaces
The Policy Binding Page contains information for attaching policies on interfaces. To attach a policy to an
interface:
1.
Click Advance Setup > Quality of Service > Policy Profiles >Policy Binding. The Policy Binding Page
opens:
Figure 171:Policy Binding Page
The Policy Binding Page contains the following fields:
•
— Selects an interface.
Interface
•
Policy Name
— Contains a list of user-defined policies that can be attached to the interface.
•
Remove — Removes policies.
–
Checked — Removes the selected policies.
–
Unchecked — Maintains the policies.
— CIR in bits per second. This field is only relevant when the
.
— CBS in bytes per second. This field is only relevant when the
. Possible values are:
Page 255
Configuring Quality of Service
Configuring Advanced QoS Settings
Police