D-Link xStack DXS-3227 Web/Installation Manual page 224

•
Remove — Removes users from a specified group. The possible field values are:
–
Checked — Removes the selected user.
–
Unchecked — Maintains the list of users.
2. Click . The Add SNMP Group Membership Page opens:
Figure 146:Add SNMP Group Membership Page
In addition to the fields in the SNMP Group Membership Page, the Add SNMP Group Membership Page contains
the following fields:
•
Authentication Method — Defines the SNMP Authentication Method.
•
Password — Defines the password for the group member
•
Authentication Key — Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The authentica-
tion and privacy keys are entered to define the authentication key. If only authentication is required, 16 bytes
are defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in hexadecimal
character strings is two hexadecimal digits. Each byte can be separated by a period or a colon.
•
Privacy Key — Defines the privacy key (LSB). If only authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a period or colon.
3. Define the User Name, Group Name, Engine ID, Authentication Method, Password, Authentication Key, and
Privacy Key fields.
4. Click . The SNMP group membership is modified, and the device is updated.
To modify SNMP Group Membership Settings:
1. Click System > SNMP > Security > Group Membership. The SNMP Group Membership Page opens.
2. Click . The SNMP Group Membership Settings Page opens:
Page 223
Configuring SNMP
Configuring SNMP Security