Snmp User Table - D-Link DGS-3324SRi User Manual

The xStack family of switches incorporates a flexible SNMP management for the switching environment. SNMP
management can be customized to suit the needs of the networks and the preferences of the network administrator. Use the
SNMP V3 menus to select the SNMP version used for specific tasks.
The xStack family of switches supports the Simp le Network Management Protocol (SNMP) versions 1, 2c, and 3. The
administrator can specify the SNMP version used to monitor and control the Switch. The three versions of SNMP vary in
the level of security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the web manager. Workstations on the
network that are allowed SNMP privileged access to the Switch can be restricted with the Management Station IP Address
menu.

SNMP User Table

The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
In the SNMP Manager folder, click on the SNMP User Table link. This will open the SNMP User Table, as shown
below.
To delete an existing SNMP User Table entry, click the
to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the SNMP User Table
Display page, as shown below.
The following parameters are displayed:
Parameter
User Name
Group Name
xStack Stackable Gigabit Layer 3 Switch Manual
Figure 8- 1. SNMP User Table
Figure 8- 2. SNMP User Table Display
Description
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
This name is used to specify the SNMP group created can request SNMP messages.
below the Delete heading corresponding to the entry you wish
232