Ssh Authentication Mode And Algorithm Settings - D-Link DGS-3324SRi User Manual

Parameter
SSH Server Status
Max Session (1-3)
Connection
TimeOut (120-600)
Auth. Fail (2-20)
Session Rekeying

SSH Authentication Mode and Algorithm Settings

The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for authentication
encryption. There are three categories of algorithms listed and specific algorithms of each may be enabled or disabled by
using their corresponding pull-down menus. All algorithms are enabled by default. To open the following window, click
Security Management > Secure Shell (SSH) > SSH Authentication Mode and Algorithm Settings:
xStack Stackable Gigabit Layer 3 Switch Manual
Description
Use the pull-down menu to enable or disable SSH on the Switch. The default is
Disabled.
Enter a value between 1 and 3 to set the number of users that may simultaneously
access the Switch. The default setting is 3.
Allows the user to set the connection timeout. The use may set a time between 120 and
600 seconds. The default setting is 120 seconds.
Allows the Administrator to set the maximum number of attempts that a user may try to
log on to the SSH Server utilizing the SSH authentication. After the maximum number of
attempts has been exceeded, the Switch will be disconnected and the user must
reconnect to the Switch to attempt another login. The number of maximum attempts
may be set between 2 and 20. The default setting is 2.
This field is used to set the time period that the Switch will change the security shell
encryptions by using the pull-down menu. The available options are Never, 10 min, 30
min, and 60 min. The default setting is Never.
226