Static Multicast Forwarding - D-Link DGS-3324SRi User Manual

Static Multicast Forwarding

The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the Forwarding &
Filtering folder in the Configuration menu, and click on the Multicast Forwarding link to see the entry screen below:
Figure 6- 33. Static Multicast Forwarding Settings and Current Multicast Forwarding Entries window
The Static Multicast Forwarding Settings page displays all of the entries made into the Switch's static multicast
forwarding table. Click the Add button to open the Setup Static Multicast Forwarding Table, as shown below:
The following parameters can be set:
Parameter
Unit
VID
Multicast MAC
Address
Port
xStack Stackable Gigabit Layer 3 Switch Manual
Figure 6- 34. Setup Static Multicast Forwarding Table
Description
Choose the Switch ID number of the Switch in the switch stack to be modified.
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
The MAC address of the static source of multicast packets. This must be a multicast
MAC address.
Allows the selection of ports that will be members of the static multicast group. The
options are:
None - No restrictions on the port dynamically joining the multicast group. When None
is chosen, the port will not be a member of the Static Multicast Group.
Egress - The port is a static member of the multicast group.
84