Web Pages - D-Link DGS-3324SRi User Manual

Area 3

Web Pages

When you connect to the management mode of the Switch with a web browser, a login screen is displayed. Enter a user
name and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Configurations - Contains screens concerning configurations for IP Address, Switch Information, Advanced Settings, Port
Configuration, IGMP, Spanning Tree, Forwarding Filtering, VLANs, Port Bandwidth, SNTP Settings, Port Security, QoS,
MAC Notification, LACP, Access Profile Table, System Log Servers, PAE Access Entity, and Layer 3 IP Networking.
Security Management - Contains screens concerning configurations for Security IP, User Accounts, Access
Authentication Control (TACACS), Secure Sockets Layer (SSL), and Secure Shell (SSH).
SNMP Manager – Contains screens and windows concerning the implementation and upkeep of the SNMP Manager of
the Switch.
Monitoring - Contains screens concerning monitoring the Switch, pertaining to Port Utilization, CPU Utilization, Packets,
Errors Size, MAC Address, IGMP Snooping Group, IGMP Snooping Forwarding, VLAN Status, Router Port, Port Access
Control and Layer 3 Feature.
Maintenance - Contains screens concerning configurations and information about Switch maintenance, including TFTP
Services, CF Services, Dual Image Information, Switch History, Ping Test, Save Changes, Reboot Services and Logout.
Single IP Management - Contains screens concerning information on Single IP Management, including SIM Settings,
Topology and Firmware/Configuration downloads.
xStack Stackable Gigabit Layer 3 Switch Manual
mode, or flow control, depending on the specified mode.
Various areas of the graphic can be selected for performing management functions,
including port configuration.
Presents switch information based on your selection and the entry of configuration
data.
NOTICE: Any changes made to the Switch configuration during the current
session must be saved in the Save Changes web menu (explained below)
or by using the command line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in the User
Accounts menu before connecting the Switch to the greater network.
47