Mac Notification; Mac Notification Global Settings - D-Link DGS-3324SRi User Manual

Xstack stackable gigabit layer 3 switch
Hide thumbs Also See for DGS-3324SRi:
Table of Contents

Advertisement

From/To
Mode
After setting the previous parameters, click Apply to allow your changes to be implemented. The LACP Port Table
shows which ports are active and/or passive.

MAC Notification

MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database.

MAC Notification Global Settings

To globally set MAC notification on the Switch, open the following screen by opening the MAC Notification folder and
clicking the MAC Notification Global Settings link:
Figure 6- 13. Current and New MAC Notification Global Settings window.
The following parameters may be modified:
Parameter
State
Interval (sec)
History size
Current MAC notification configurations can be viewed in the Current MAC Notification Global Settings window, as
seen above.
xStack Stackable Gigabit Layer 3 Switch Manual
A consecutive group of ports may be configured starting with the selected port.
Active - Active LACP ports are capable of processing and sending LACP control
frames. This allows LACP compliant devices to negotiate the aggregated link so the
group may be changed dynamically as needs require. In order to utilize the ability to
change an aggregated port group, that is, to add or subtract ports from the group, at
least one of the participating devices must designate LACP ports as active. Both
devices must support LACP.
Passive - LACP ports that are designated as passive cannot initially send LACP
control frames. In order to allow the linked port group to negotiate adjustments and
make changes dynamically, one end of the connection must have "active" LACP
ports (see above).
Description
Enable or disable MAC notification globally on the Switch. The default setting is
Disabled.
The user may set the time, between 1 and 2,147,483,647 seconds, between MAC
notifications. The default setting is 1 second.
The maximum number of entries listed in the history log used for notification. Up to
500 entries can be specified. The default setting is 1.
64

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3324srDxs-3326gsrDxs-3350sr

Table of Contents