Snmp Host Table - D-Link DES-3226 User Manual

SNMP Host Table

Use the SNMP Host Table to set up trap recipients.
To delete an existing entry, click the selection button on the far left that corresponds to the port you want to configure and click
the Delete button. To create a new entry, click the New button, a separate menu will appear.
Parameter
IP Address
SNMP Version
Community String or
SNMP V3 User Name
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Figure 6 - 31. SNMP Host Table
Figure 6 - 32. SNMP Host Table – Add New
Description
Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
From the pull-down menu select:
V1 – To specifies that SNMP version 1 will be used.
V2 – To specify that SNMP version 2 will be used.
V3 – To specify that the SNMP version 3 will be used.
Type in the community string or SNMP V3 user name as appropriate.
64