D-Link DES-3226 User Manual page 97

Configure the following 802.1x port settings:
Parameter
Port
AdminCtlDir
Port Control
Quiet Period
Tx Period
Support Timeout
Server Timeout
MaxReq
ReAuthPeriod
ReAuthenticate
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Description
Port being configured for 802.1x settings.
From the pull-down menu, select whether a controlled Port that is unauthorized will exert
control over communication in both receiving and transmitting directions, or just the
receiving direction.
From the pull-down menu, select Force Authorized, Force Unauthorized or Auto − Force
Authorized forces the Authenticator of the port to become Authorized. Force
Unauthorized forces the port to become Unauthorized.
Select the time interval between authentication failure and the start of a new
authentication attempt.
Select the time to wait for a response from a supplicant (user) to send EAP
Request/Identity packets.
Select the time to wait for a response from a supplicant (user) for all EAP packets, except
for the Request/Identity packets.
Select the length of time to wait for a response from a Radius server.
Select the maximum number of times to retry sending packets to the supplicant.
Select the time interval between successive re-authentications.
Enable or disable reauthentication.
94