Initialize Ports - D-Link DES-3226 User Manual

Initialize Ports

Use this to initialize the 802.1x functions on a specified ports or for specified MAC addresses operating from a specified range
of ports.
Parameter
Port
Configure Ports from __ to __
MAC Address
Re-Authenticate Ports
802.1x ports must be periodically re-authenticated (when the re-authentication period lapses). Use this menu to determine if
previously authenticated devices are re-authenticated based on either MAC address or port number.
Parameter
Port
Configure Ports from __ to __
MAC Address
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Figure 6 - 77. Initialize Ports
Description
Select the port or lowest number of the group of ports being configured.
A consecutive group of ports may be configured starting with the selected port.
Specify the MAC address to add to the list for MAC based 802.1x initialization.
Click the option box to insert a check mark before typing in the MAC address. This
option can only be used if the authorization is MAC-based (see 802.1 State).
Figure 6 - 78. Reauthenticate Ports
Description
Select the port or lowest number of the group of ports being configured.
A consecutive group of ports may be configured starting with the selected port.
Specify the MAC address to add to the list for re-authentication. Click the option
box to insert a check mark before typing in the MAC address. This option can only
be used if the authorization is MAC-based (see 802.1 State).
96