To configure Traffic Segmentation for a port, select the ports from the Port List that are allowed to receive forwarded frames
from the port that is being configured. Click the Apply button to add the ports to the forward list.
Serial Port Settings
The Serial Port Settings window allows the configuration of the Switch's serial port.
Click on the Serial Port Settings link from the Basic Setup folder.
The following fields can then be set for the serial port:
Parameter
Baud Rate
Data Bits
Stop Bits
Auto-Logout
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Figure 6 - 20. Traffic Segmentation – Edit
Figure 6 - 21. Serial Port Settings
Description
Set the serial bit rate used to communicate with a management station. The console baud
rate is 9600 bits per second.
Displays the number of bits that make up a word when communicating with the
management station. The console interface uses 8 data bits.
Displays the number of bits used to indicate that a word has been completely transmitted.
The console interface uses 1 stop bit.
This sets the time the interface can be idle before the Switch automatically logs-out the
user. The options are 2 mins, 5 mins, 10 mins, 15 mins, or Never.
56