Advanced Setup; Configuring Vlans - D-Link DES-3226 User Manual

DES-3226S Layer 2 Fast Ethernet Switch User's Guide

Advanced Setup

Advanced setup menus include menus used to setup VLANs, change QoS scheduling, configure link aggregation, adjust
Spanning Tree and Rapid Spanning Tree configuration, setup 802.1x parameters, assign unicast and multicast forwarding and
configure port mirroring.

Configuring VLANs

To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions and to configure the port settings for IEEE 802.1Q VLAN
support. Go to the Advanced Setup folder, select VLAN Configurations, and click the 802.1Q VLANs link to open the
following dialog box:
Figure 6 - 40. 802.1Q VLANs
To delete an existing 802.1Q VLAN, click the corresponding click-box to the left of the VLAN you want to delete from the
Switch and then click the Delete button.
To create a new 802.1Q VLAN, click the New button:
Figure 6 - 41. 802.1Q Static VLANs Entry Settings – Add
69