D-Link DES-3226 User Manual page 57

Select the port you want to configure and click Edit. The Port Security Edit menu appears, notice that once this menu is
available you may move to any port on any Switch in the stack to configure security for that port.
Configure the following parameters for Port Security:
Parameter
Admin State <Disabled>
Max Learning Address <1 >
Lock Address Mode
<Delete On Reset>
Configure Ports from __ to
__
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Figure 6 - 18. Port Security Settings
Description
Toggle Admin State to either enable or disable port security for the port.
Select the maximum number of addresses that may be learned for the port. The
port can be restricted to 10 or less MAC addresses that are allowed for
dynamically learned MAC addresses in the forwarding table.
Select Delete On Timeout to clear dynamic entries for the ports on timeout of the
Forwarding Data Base (FDB). Specify Delete On Reset to delete all FDB entries,
including static entries upon system reset or rebooting.
Use this to specify a consecutively numbered group of ports on the Switch for
configuration.
54