D-Link DES-3226 User Manual page 61

Configure the following settings in the Current Time Settings menu:
Parameter
SNTP State
SNTP Primary Server
SNTP Secondary Server
SNTP Polling Interval
Set Current Time
Year
Month
Day
Time in HH MM SS
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
Description
Enable or Disable SNTP service
Enter the IP address of the primary server the SNTP information will be taken
from.
Enter the IP address of the secondary server the SNTP information will be taken
from in the event the primary server is unavailable.
This is the interval between requests for updated SNTP information. The polling
interval ranges from 30 to 99,999 seconds.
Select the year for manual date setting.
Select the month for manual date setting.
Select the day of the month for manual date setting.
Set time for system clock using 24-hour time clock (military time) notation.
Figure 6 - 23. Time Zone/DST Settings
58