Network Management; Snmp Settings - D-Link DES-3226 User Manual

Network Management

The DES-3226S incorporates a flexible SNMP management for the Switching environment. SNMP management can be
customized o suit the needs of the networks and the preferences of the network administrator. Use the SNMP V3 menus to
select the SNMP version used for specific tasks.

SNMP Settings

The DES-3226S supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The SNMP version used
to monitor and control the Switch can be specified by the administrator. The three versions of SNMP vary in the level of
security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the web manager. Workstations on the
network that are allowed SNMP privileged access to the Switch can be restricted with the Management Station IP Address
menu.
SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can be accessed by an
SNMP manager.
To delete an existing View Table
entry, click the selection button on
the far left that corresponds to the
port you want to configure and
click the Delete button. To create
a new entry, click the New button,
a separate menu will appear.
Figure 6 - 25. SNMP View Table – Add New
DES-3226S Layer 2 Fast Ethernet Switch User's Guide
60
Figure 6 - 24. SNMP View Table