start before you SIM Install Install a Micro 3FF SIM into Slot 1 of your device. (Note: It is not recommended to use a combo SIM or SIM adapter) Activate the SIM with your carrier. Follow the basic setup instructions on the next page to connect to your device. Slot 1 Slot 2 Faceplate...
Windows 8 or newer, Linux 2.6.32 or later, or Ubuntu 14.04 or later required. Install the appropriate drivers onto your system from https://www.inseego.com/software-downloads/. Drivers and SDK integration is required for use with Linux-based systems, files can be accessed from the link above.
Page 4
Skyus DS2 The Skyus DS2 is capable of supporting all major carriers, but is capable of storing up to four carrier firmware images on the device at the same time to simplify deployment. When loaded with the appropriate firmware, switching carriers is as simple as loading the appropriate SIM card.
Page 5
SKYUS DS2 APAC • SKYUS DS2 Inseego Corp. declares that SKYUS product is in compliance with the Radio Equipment Directive 2014/53/EU, its essential requirements and other relevant provisions of the directive. The Declaration of Conformity may be consulted at Inseego Corp., 9710 Scranton Rd., Suite 200 San Diego , USA.
Page 6
27 dBm ±1dB LTE Band 1,3,5,8,18,19,21,28,39 23 dBm ±1dB LTE Band 7, 38, 40, 41 22 dBm ±1dB SKYUS DS2 APAC UMTS Band 1, 5, 6, 8, 9, 19 23 dBm ±1dB TD-SCDMA Band 39 23 dBm ±1dB LTE Band 1,2,3,4,5,8,12,13,20,25,26 23 dBm ±1dB...
Page 7
20 cm (8 in.) between the equipment and users/bystanders at all times. Cellular External Antenna Considerations: • To comply with EN 62311 RF Exposure Requirements, the Maximum Antenna Gain Must Not Exceed: SKYUS DS EU = 9dBi. SKYUS DS APAC = 8dBi SKYUS DS2 = 9 dBi...
This FCC statement is applicable to the following model: SKYUS DS2. Contains FCC ID: N7NMC7455. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the auser’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 9
Canada This ISED Canada statement is applicable to the following models: SKYUS DS2 Contains IC: 2417C-MC7455 ISED RSS-Gen Notice: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference; and 2.
Republic of Korea regulatory information Applicant company name: Inseego Corp. This statement is applicable to the following models: SKYUS DS2 APAC KC ID: R-R-iSg-SKYUSDS2APAC This device contains a certified cellular module: Manufacturer: Sierra Wireless, Inc. Model: MC7430 KC ID: MSIP-CRM-SWK-MC7430...
APN - Access Point Name For your Skyus DS2 to successfully connect to the internet, it needs to have the correct carrier-specified APN selected. If you do not know the correct APN for your device, please contact your cellular carrier. Download and use the Skyus Support Tool (SST) from the product web page to confirm and/or set the correct APN.
Need help?
Do you have a question about the Skyus DS2 and is the answer not in the manual?
Questions and answers