Page 2
Windows 8 or newer, Linux 2.6.32 or later, or Ubuntu 14.04 or later required. Install the appropriate Windows drivers onto your system from: https://www.inseego.com/software-downloads/ The Skyus SC typically does not require drivers for Linux systems using the modem’s built in CDC-ECM interface. USB 2.0 port (5VDC @ 1A) required.
Page 3
Login to the Skyus SC Verify your device is active, connected to a host, and antennas are installed. Open a web browser and type skyussc.inseego.com:8080 into the address bar. The device UI login page can be seen to the right.
Page 4
interface user Web UI View all useful device statistics from the home page. To configure your device, click ‘Edit Settings’ .
configuration device Manual Configuration Creating a Config File Fill in all applicable settings. Fill in all settings as desired. Click ‘Save Changes’ . Click ‘Save Configuration’ . Loading a Config File Click ‘Load Configuration’ . Select the appropriate file and click ‘Open’ .
A connection manager establishes and maintains the cellular connection of a device. The Skyus SC by default has a built-in connection manager that is typically compatible with Windows 8 or later, Linux Kernel 2.6.32 or later, and Ubuntu 14.04 or later.
What hardware/operating systems support the Skyus SC? Windows 8 or later is supported by the Skyus SC using Drivers that can be found at https://www.inseego.com/software-downloads/. Linux Kernel 2.6.32 or later and Ubuntu 14.04 and later are expected to be plug and play compatible using the devices built-in CDC-ECM interface.
Need help?
Do you have a question about the Skyus SC and is the answer not in the manual?
Questions and answers