What Is Enclosed; Installing The Water Block - ekwb EK-Velocity sTR4 User Manual

WHAT IS ENCLOSED

The following items are enclosed with each EK-Velocity water block:
- EK-Velocity sTR4 CPU water block
- Allen (hex) key 2.5mm
- Allen (hex) key 2mm
- EK-TIM Ectotherm 1g

INSTALLING THE WATER BLOCK

Non-abrasive
cloth
IHS
STEP 1
Cleaning the CPU: Wipe the CPU's contact surface (by using non–
abrasive cloth or Q-tip, as shown on sample photo).
Applying thermal compound: EK recommends blob or line method
of applying the enclosed EK-TIM Ectotherm (1g) thermal compound
to the CPU heatspreader (IHS)
Applying thermal compound: On a clean IHS, apply a line of
thermal compound and spread it over the whole CPU heat spreader
(IHS) with a credit card or equivalent - see sample photo on left
STEP 1
- 5 -