Clavia Nord Modular G2 User Manual page 67

NORD MODULAR G2 V1.4x
Voice Area. Now click on the knob above the V
the Lev knob on the EqPeak module to about 80. Now press the Ctrl key on the computer keyboard,
keep it pressed, and turn the Lev knob fully open with the mouse. You see that this leaves a red area on
the Lev knob that shows the Morph range. Now set the Freq of the EqPeak to between 2kHz and 3kHz,
set the Gain knob to about -2.5dB, again keep the Ctrl knob pressed and open the Gain knob to about
+7dB. These actions have assigned the Lev knob and the Gain knob to the Velocity Morph. If all went
well it should look like in the illustration. Play some notes on the keyboard and hear how the Velocity
now works out on the sound.
R
ECHECK YOUR WORK
Take some time now to retrace the signal flow in the Patch until you are sure you understand how the
initial signal from the Oscillator is processed by the other modules and ends up in the FX Area.
C
HANGING A MODULE INTO ANOTHER TYPE FROM THE SAME
When you want to check out another Oscillator instead
of the OscDual, you can instantly replace it through the
D M
ROPDOWN ENU
of the module. If you click on this Dropdown Menu
Icon a list will appear, showing all modules in the
Module Group. Instead of the OscDual you could e.g.
pick the OscShapeA module and play with its Shape
knob to change the basic sound of this oscillator.
Note that this Shape knob also has a modulation input
where you can connect the Env output of the
EnvADSR module to have the waveshape glide along
with the loudness contour, just like the filter swept
along with the loudness contour.
N ! When replacing a module by another module
OTE
the Editor will try to keep all cable connections. Note
however that some modules do have extra inputs, and
if these are used it might affect the recabling. Like if
you change the OscShpA into a OscD oscillator the
cable to the Shape input will get lost. Try out and see
for yourself how choosing another module affects the
recabling.
Note that you can always use the Undo function a
couple of times to revert to a previous situation.
I in the top lefthand corner
CON
5. The Editor application: Making your first patch
Morph Group, so this knob shows up in red. Reduce
EL
M G
ODULE ROUP
Page 67