Table of Contents
Advertisement
NORD MODULAR G2 V1.4x
13. Module reference: Note group
BP
Set the break point note number. The value is displayed in the corresponding display box. Range: C-1 to
G9.
U
PPER
Set the amplification/attenuation slope for the upper key section with the knob. The value is displayed
in the corresponding display box. Range: +/-8.0 dB per octave.
GRAPH
Displays the two gain slopes and the break point graphically. The Y-axis represents the output level
(logarithmic) and the X-axis the entire note range (C-1 to G9). the horizontal line represents the +64
units (0 dB) output level.
L
EVEL OUTPUT
The output value is the combined result of the note input and scaling values. Signal: Unipolar.
I
NPUT
The D
A
/C
signal input to the internal gain control function. Patch for example
YNAMIC
UDIO
ONTROL
an Oscillator audio signal here and patch the output to a FM input of another oscillator.
O
UTPUT
The output of the amplified/attenuated input signal. Signal: B
.
IPOLAR
Page 171
Advertisement
Table of Contents
