Advertisement
Advertisement
Table of Contents
Related Manuals for Clavia nord lead 2X
Summary of Contents for Clavia nord lead 2X
- Page 1 SERVICE MANUAL...
-
Page 2: Table Of Contents
Running the test program ............4 Calibrating the DACs ..............5 Hardware ..................6 Hardware structure ..............6 Opening the synth............... 7 Hardware configuration............... 8 Hardware versions..............8 Software ..................8 Spare Parts................... 9 Clavia DMI Service manual Nord Lead 2x rev. 1.1 Page 1... - Page 3 The Nord Lead 2X Service manual is arranged to help our service centers in the best way possible. However the Nord Lead 2X user manual is a very useful guide, use it as a reference in addition to this service manual. If you have access to internet you’ll find the user manual available for download and also a lot of useful information on our website www.clavia.se...
-
Page 4: Overview
D: 265 mm D: 210 mm D: 210 mm H: 105 mm H: 105 mm H: 105 mm H: 105 mm Weight: 6,7Kg Weight: 5,3Kg Weight: 4,5 Kg Weight: 4,5 Kg Clavia DMI Service manual Nord Lead 2x rev. 1.1 Page 3... -
Page 5: Test Program
The pitch stick is tested by moving it fully to the left, then right and finally to the left again. Hold the pitch stick in the leftmost position in order to continue testing another function. Clavia DMI Service manual Nord Lead 2x rev. 1.1 Page 4... -
Page 6: Calibrating The Dacs
Checking the outputs The Nord Lead 2X has the possibility to output a clean sine wave on each of the outputs. This is not possible on the Nord Lead 2. To check the function of a single output, first make sure the synth is on. -
Page 7: Hardware
Power supply The Nord Lead 2X is supplied with several different voltages from the power board. These are +3.3V, ±5V and ±12V. For more information on where to measure these voltages see the appropriate schematic. The Power supply is connected to the main board with a 10 pole connector P2 (22480). -
Page 8: Opening The Synth
(22400) (40018) chassis. Loosen the nine screws holding the panel board to the upper lid. (40262) You can now lift out the panel board. Clavia DMI Service manual Nord Lead 2x rev. 1.1 Page 7... -
Page 9: Hardware Configuration
In order to return to factory settings, press <shift + mod env> after the Nord Lead 2/2X has powered up. The original programs are restored as they were programmed when the unit left the factory. All factory presets are available for download at www.clavia.se Clavia DMI Service manual Nord Lead 2x rev. 1.1 Page 8... -
Page 10: Spare Parts
Spare Parts For Nord Lead 2 parts please contact service@clavia.se Mechanical: Panel Board: Part no. Item Part no. Item 40219 Angle bracket, support NL2x 69177 Panelboard NR2X 40240 Angle bracket, swan 69169 Panelboard Nord Lead 2X 22090 Cable 3pol mod.wheel... - Page 11 22600 Connector 1/4" Stereo 40176 Plastic isolator 22590 Connector 1/4" Mono 40180 Spacer 2mm Nylon 22640 Connector din 5pol Midi 22670 Connector 16 pole, micromatch 22500 Connector 20 pole 22480 Connector 10pol Clavia DMI Service manual Nord Lead 2x rev. 1.1 Page 10...