Clavia Nord Modular G2 User Manual page 45

NORD MODULAR G2 V1.4x
2. When in M
ORPH
M button and keep it pressed down. All circular
ORPH
LED GRAPHS
Alternatively you can quickly press the Wheel
Morph button two times (like a double click on a
mouse button on a computer) and the Wheel
Morph will flash.
LED
3. While keeping the Wheel Morph button pressed
down, turn the parameter K
assign to the Wheel Morph group. The first and last
of the Morph range will light up. A Morph
LED
range can be either negative or positive according
to your choice. The "zero" Morph value is the
parameter's initial setting. In this example we assign
the A, D, S, and R parameters of the EnvADSR1
module.
4. Note that while the Wheel Morph
pressed, you can set the lower limit of the Morph range. And while the Wheel Morph
the double press you can set the upper limit of the Morph range. When the Wheel Morph
press the Wheel Morph button once more to make it light up steady again.
When you are ready with the assignments, release the W
will light up again to show the regular settings. Now, the Wheel Morph
dicate that there are parameters assigned to this Morph group.
Note that you can also assign parameters directly from the Parameter Pages to Morph groups. In other
words, you don't have to enter Patch Edit mode if the parameters you want to morph are already assigned
to a Parameter Page.
To change the initial parameter value(s) and thus move the entire Morph range (sector), just change the
parameter value without pressing any M
parameter).
The Wheel, Aftertouch, Control Pedal, Sustain Pedal and Pitch Stick Morphs will show the actual
parameter values when you change the source value is the morphed parameters are currently displayed
in the A
SSIGNABLE
values as you play on the keyboard. It's made this way because it gets irritating after a while to watch all
flickering s as you play.
LED
Note: If you have assigned the same parameter to several Morph groups and control the
parameter simultaneously from the different Morph group control sources, the parameter values
will be added together. This means that the parameter value can go beyond the ranges set for
each individual Morph group.
Tip! If you want to enter "Morph Assign" mode without needing to hold the M
button you can double-click the M
A mode, press the W
SSIGN
on the front panel will go blank.
you want to
NOBS
LED
ORPH GROUP
D . The Velocity and Keyboard Morphs don't show the actual parameter
ISPLAYS
ORPH GROUP
3. Working with the synth: Morph groups
HEEL
EnvADSR1---------
Attack
EnvADSR1---------
Attack
lights up steadily and without keeping the Wheel Morph button
HEEL
button (just as you would change an unassigned
button. Click again to exit Morph Assign mode.
-----------------
Decay Sustain Release
-----------------
Decay Sustain Release
LED
M button and the
ORPH
will light steadily to in-
LED
ORPH GROUP
-------------
KBG Sha
-------------
KBG Sha
flashes after
flashes
LED
graphs
LED
Page 45