Delay - Clavia Nord Modular G2 User Manual

NORD MODULAR G2 V1.4x
from 10 msec to 100 seconds. The output pulse duration can be dynamically controlled by a control
signal on the blue control input.
The module can initiate the logic
on its input, selection is done with the drop-down selector.
D
ELAY TIME MODULATION
A D C
YNAMIC ONTROL
attenuated with the knob of [A
S /L /H
UB O I SCROLL BUTTON
Select Delay time ranges by clicking this scroll button.
P
ULSE TIME KNOB
Set the Pulse time with the knob. Range (Sub): 0.10 ms to 1.00 s, (Lo): 1.04 ms to 10.00 s, (Hi): 10.4 ms
to 100.0 s. If the module receives another edge trigger during the Pulse period, it will extend the duration,
with the value set with the knob.
P T
ULSE YPE DROP
Select Pulse Type between Positive Edge Pulse trig and Negative Edge Pulse trig. See also
Logic module parameters".
D
ELAY
This module can delay the edges of a logic
pulse. Depending on the setting of the Delay Type drop-
down selector the module will delay the positive edge, the
negative edge or both the positive and negative edge by the time set with the Time knob. When both the positive
and negative edge are delayed it is like the clock pulse is shifted in time. Note that the module can only
delay one single pulse, meaning that it must have finished with the delay of a clock pulse before it can
receive a new clock pulse to be delayed.
D
ELAY TIME MODULATION
A D C
YNAMIC ONTROL
attenuated with the knob of [A
S /L /H
UB O I SCROLL BUTTON
Select Delay time ranges by clicking this scroll button.
D
ELAY TIME KNOB
Set the delay time with the knob. Range (Sub): 0.10 ms to 1.00 s, (Lo): 1.04 ms to 10.00 s, (Hi): 10.4 ms
to 100.0 s.
D T
ELAY YPE DROP
Select Delay Type between Positive Edge Delay (only the positive edge of the input signal is delayed),
Negative Edge Delay (only the negative edge of the input signal is delayed) and Cycle Delay (the entire
input signal cycle is delayed). See also
8C
OUNTER
The 8-Counter steps a logic
over eight outputs. Note that only one of the outputs
pulse on either the positive edge or the negative edge of the logic signal
HIGH
/A input for modulating the Delay time. The modulation amount can be
UDIO
T
TTENUATOR
-
DOWN SELECTOR
HIGH
/A input for modulating the Delay time. The modulation amount can be
UDIO
T
TTENUATOR
-
DOWN SELECTOR
"Common Logic module
signal sequentially
HIGH
I].
YPE
clock
I].
YPE
parameters".
13. Module reference: Logic group
"Common
Page 237