Table of Contents
Advertisement
13. Module reference: LFO group
1/96
OUTPUT
This yellow output transmits 96 clock pulses per quarter bar (or 24 clock pulses for each quarter note).
Signal: Logic.
1/16
OUTPUT
This yellow output transmits 16 clock pulses per quarter bar (or 4 clock pulses for each quarter note).
Signal: Logic.
S
YNC OUTPUT
This yellow output provides you with a logic pulse, which is calculated from the Clock signal, at a rate set
by the 'Sync every nn beats' parameter mentioned above. The Sync function provides a method of telling
the Nord Modular G2 sequencer modules where the first beat in a bar is. Patch this output to the Rst
(reset) input of the sequencer modules. This function is absolutely essential to use if you plan to
synchronize patches in different slots to each other, or if you want to synchronize Nord Modular G2 to
an external sequencer. Signal: Logic.
• Try to make a habit out of always using this function if you are using more than one sequencer module
in a patch, especially if you want to mix modules clocked with e.g. triplet resolutions with other mod-
ules clocked with eighth or sixteenth notes.
See also
"Common LFO
Page 192
parameters".
NORD MODULAR G2 V1.4x
Advertisement
Table of Contents
