Clavia Nord Modular G2 User Manual page 127

NORD MODULAR G2 V1.4x
assignment to the new position. With this function you can very quickly reorganize all your knob
assignments. Again, try it out and see for yourself.
Alternatively you can drag a knob from a module to the Parameter Overview by first pressing and holding
the Alt key on the computer keyboard and then drag the knob to a location on the Parameter Overview
window.
A
SSIGN MIDI
With this button you can instantly assign
Parameter Overview. The function will start by assigning the first available
knob in the first parameter page. Then it will assign the next available
knob, and so on, until all available
In practise you would probably first assign some
( eneral ) prescribed
G MIDI
function.
MIDI
Note that it is also possible to assign a
panel knob. To do so you have to use the rightclick menu directly on the knob on the module itself. Or
alternatively use the
C
LEAR MIDI
With this function you can immediately clear all assigned
did all the
MIDI CC
reversal of the Assign
hit this function button.
V
IEW MIDI
This function instantly shows all assigned
to panel controls through the Parameter Pages. Note that knobs and buttons on modules that are not
assigned in the Parameter Pages can still have a
ontroller (M key) function to get the complete list of all
C
V
IEW BUTTONS
On some modules, like the Sequencer modules, a single assignment assigns both the knob/slider plus its
associated pushbutton to a frontpanel endless rotary dial and its associated pushbutton. With the View
Buttons function you can toggle the display between the knobs/sliders and the pushbuttons. If you have
assigned
MIDI CC
assigments. To check this function out, create an empty patch, drag only a Sequencer module into the
patch and from the 'rightclick on the module background' menu choose Assign->PageA->Multicolumn.
Then click Assign
good look to see how things got assigned.
G
LOBAL PAGES
This function makes the Parameter Overview window toggle between the assignments made for the
Patch in the Slot you're currently working on, or the assignments that you are making for the Global
Parameter Pages assignments.
Note that Global Parameter Pages allows for a mix of assignments from all slots. Global Pages are ideal
to use when you are making a Performance which uses several slots. (see
Parameter Pages" on page
MIDI CC
#s for things like panning, etc. Then you fill in the rest with this Assign
MIDI CC
MIDI CC
L function (see also
MIDI EARN
# assignments by hand all you work will get lost. This function must be seen as the
function. Note that you can use the Editor Undo function if you accidentally
MIDI
#s you will see that the knobs/sliders and the buttons can have different
. Now click the View Buttons function and the View
MIDI
49)
#s to all knobs and buttons that are assigned in the
MIDI CC
#s are used.
#s by hand, e.g. if you would use the GM
MIDI CC
# directly to a knob on a module that is not assigned to a
"MIDI-Learn function (L key)" on page
#s. Note that this is quite drastic, if you
MIDI CC
#s for those knobs and buttons that are also assigned
MIDI CC
# assigned to them. Use the rightclick menu
MIDI CC
MIDI CC
9. Editor menu reference: Tools menu
# to the first assigned
MIDI CC
# to the next assigned
MIDI CC
# assignements in a Patch.
function and have a
MIDI
also"Global (Performance)
145).
MIDI
#
MIDI CC
Page 127