Tap Tempo; Reverb Select; Mst Clk; Ping Pong - Clavia Nord Lead A1 User Manual

Analog modeling
Table of Contents

Advertisement

26 | nord lead a1 User ManUal v1.3x

Tap Tempo

Tap repeatedly on the Tap Tempo button to set the tempo for the delay.
You need four consecutive taps to set a tempo, but the tempo can be
fine tuned with additional taps after those initial four.

Mst Clk

Enable Mst Clk to synchronize the delay to the Master Clock.
Feedback
Feedback allows you to select the number of repeats. There are 4
settings to chose from, ranging from one repeat (no active LEDs), to
several (both the 1 & 2 LEDs are lit).

Ping Pong

Ping Pong will place every other delay repeat alternatively in the left/
odd and right/even audio output.
Dry/Wet
Sets the amount of the delay in the audio signal.
Dry/Wet is routed in a send configuration, it can be Morphed to
"completely dry" without affecting already present delay repeats.

Sound Menu Delay Mode

The Sound Menu Delay Mode setting can be set to normal or analog.
This determines if the delay should change the pitch on sounding re-
peats in the fashion of an analog delay, if the Delay Tempo is adjusted.
When set to Normal, the pitch does not change.
On/Off
Turns the delay on or off.

Randomize Sound

Randomize Sound will do exactly what it says: it will generate a
sound by randomly changing most of the parameters. This feature
can be put to good use, to create those sounds that are outside the
box. For a detailed overview of the Randomize Sound feature, please
look at page 15.
Output
Level
Output Level sets the amplitude. The setting of this
parameter is stored in the Program.
Pan
Use Pan (Shift + Level) to position the sound in the stereo panorama.
The Pan LED will be lit as soon as a sound is panned to either side of
the center.
Reverb
The Reverb effects simulates natural sound reflec-
tions in various acoustic environments.
Dry/Wet
The Dry/Wet knob controls the balance in amplitude
between the unprocessed (dry) and processed (wet)
signal.
Dry/Wet is routed in a send configuration, it
can be Morphed to "completely dry" without
affecting already present reverberations.

Reverb Select

The Reverb button selects the type of reverb effect:
Setting
Room
Small reverberation with room ambience and a fast decay.
Stage1
Medium reverberation with stage ambience, medium decay and a
mellow character.
Stage2
Medium reverberation with stage ambience, medium decay and a
bright character.
Hall1
Full reverberation with a hall ambience, slow decay and a mellow
character.
Hall2
Full reverberation with a hall ambience, slow decay and a bright
character.
On/Off
Turns the Reverb on or off.
Like
The Like button lets you save programs or entire performances to
the Like memory. Performances and programs have separate Like
memories, with 50 locations each. When you have reached the
50th Like location, the next Like will overwrite the content in the 1st
location. The Like memory is temporary and will be cleared when
the Nord Lead A1 is powered off. For a detailed overview of the Like
feature, please look at page 15.

Note Trig (Nord Lead A1R)

Press Shift + Note Trig to trigger a note on the
Nord Lead A1R. The actual note to be triggered
can be selected by turning the Program Dial
when holding this button combination.
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nord lead a1r

Table of Contents