Getting Started - Icom IC-F3/S Instruction Manual

NGERANG
GETTING STARTED 1 IH
"A power-up alert tone sounds for about
@ Flexible antenna 2 sec. and an opening message may
®© Belt clip
appear.
@ 1922A REAR-SHEET (Above functions depend on pre-setting.)
"The BP-196 BATTERY PACK comes at- Then a channel number appears on the
tached to the transceiver.
=
display.
'Ca' oo ig Kui
Channel number may differ from this.
not sound or a channel number does
not appear on the display, turn the
transceiver OFF, check the battery,
then turn the transceiver back ON.
If the power-up tone still does not
sound or a channel number does not
appear, charge the battery or replace
© BELT CLIP
Attach the belt clip to the transceiver as illustrated below.
Attach the belt-clip Release the belt-clip
NGANG
= :
OTE: To increment or decrement the
isplayed channel, push [A] or [V]
eys.