E Battery case
When using an optional BP-194 BATTERY CASE attached to
the transceiver, install
8 AA (R6) size alkaline or Ni-Cd bat-
teries as illustrated below.
BATTERY PACKS /
© Battery case cautions
When installing Ni-Cd batteries:
Make sure all Ni-Cd cells are the same brand, type and ca-
pacity.
e Never mix old and new batteries.
Either of the above may cause a fire hazard or damage the
transceiver.
When installing dry cell or alkaline batteries:
«Never connect DC power to the transceiver. Such a con-
nection always charges the installed batteries and will dam-
age the transceiver.
For both Ni-Cd and dry cell batteries:
|
«Never incinerate used battery cells since internal battery gas
may cause them to rupture.
e Never expose a detached battery case to water.
If the battery case gets wet, be sure to wipe it dry before
using.
Need help?
Do you have a question about the IC-F3/S and is the answer not in the manual?