IEI Technology ECN-380-QM87i User Manual

High performance fanless embedded system with intel core i5-4400e or celeron 2000e processor, vga, dual hdmi, rohs compliant
Table of Contents

Advertisement

Quick Links

ECN-380-QM87i Embedded System
MODEL:
ECN-380-QM87i
High Performance Fanless Embedded System with Intel® Core™ i5-4400E
or Celeron® 2000E processor, VGA, Dual HDMI,
RoHS Compliant
User Manual
Page i
Rev. 1.10 – May 27, 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECN-380-QM87i and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IEI Technology ECN-380-QM87i

  • Page 1 ECN-380-QM87i Embedded System MODEL: ECN-380-QM87i High Performance Fanless Embedded System with Intel® Core™ i5-4400E or Celeron® 2000E processor, VGA, Dual HDMI, RoHS Compliant User Manual Page i Rev. 1.10 – May 27, 2021...
  • Page 2 ECN-380-QM87i Embedded System Revision Date Version Changes May 27, 2021 1.10 Updated Section 2.3: Unpacking Checklist Added Section 3.7: Available Drivers July 14, 2017 1.01 Updated Section 1.2: Model Variations Updated Section 3.7: Powering On/Off the System Added Section 3.8: IPMI Setup Procedure October 23, 2014 1.00...
  • Page 3 ECN-380-QM87i Embedded System Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4: Manual Conventions

    ECN-380-QM87i Embedded System Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
  • Page 5: Table Of Contents

    ECN-380-QM87i Embedded System Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 M ....................2 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 T ..................3 ECHNICAL PECIFICATIONS 1.5 F ......................5 RONT ANEL 1.6 R .......................
  • Page 6 ECN-380-QM87i Embedded System 4.1.5 BIOS Menu Bar ....................25 4.2 M ........................27 4.3 A ....................... 28 DVANCED 4.3.1 ACPI Settings ....................29 4.3.2 RTC Wake Settings ................... 30 4.3.3 Trusted Computing ................... 31 4.3.4 CPU Configuration ..................33 4.3.5 SATA Configuration ..................35 4.3.6 Intel(R) Rapid Start Technology ...............
  • Page 7 ECN-380-QM87i Embedded System B.1.2 Anti-static Precautions ..................69 B.1.3 Product Disposal ..................... 70 B.2 M ............71 AINTENANCE AND LEANING RECAUTIONS B.2.1 Maintenance and Cleaning ................71 B.2.2 Cleaning Tools ....................71 C WATCHDOG TIMER ....................73 D HAZARDOUS MATERIALS DISCLOSURE ............76 D.1 R...
  • Page 8 List of Figures Figure 1-1: ECN-380-QM87i ......................2 Figure 1-2: ECN-380-QM87i Front Panel..................5 Figure 1-3: ECN-380-QM87i Rear Panel ..................6 Figure 1-4: Physical Dimensions (mm) ..................7 Figure 3-1: HDD Cover Retention Screws .................. 13 Figure 3-2: HDD Installation ......................13 Figure 3-3: HDD Retention Screws .....................
  • Page 9: List Of Tables

    ECN-380-QM87i Embedded System List of Tables Table 1-1: ECN-380-QM87i Model Variations ................2 Table 1-2: Technical Specifications ....................4 Table 4-1: BIOS Navigation Keys ....................25 Page ix...
  • Page 10 ECN-380-QM87i Embedded System List of BIOS Menus BIOS Menu 1: Main ........................27 BIOS Menu 2: Advanced ......................29 BIOS Menu 3: ACPI Settings ....................... 29 BIOS Menu 4: RTC Wake Settings ....................30 BIOS Menu 5: Trusted Computing ....................32 BIOS Menu 6: CPU Configuration ....................
  • Page 11: Introduction

    ECN-380-QM87i Embedded System Chapter Introduction Page 1...
  • Page 12: Overview

    Full HD video quality. The ECN-380-QM87i is equipped with an abundant of I/O ports and supports a wide range of operating temperature. Four USB 2.0 and two USB 3.0 ports provide flexible expansion options.
  • Page 13: Features

    Intel® Core™ i5-4400E 2.7 GHz / Celeron® 2000E 2.2 GHz  Triple video outputs: 2 x HDMI + VGA  Two 2.5'' SATA 6Gb/s HDD/SSD drive bays 1.4 Technical Specifications The ECN-380-QM87i technical specifications are listed in Table 1-2. Specifications Chassis Color Silver Dimensions (WxDxH) 265 x 134 x 56.7 mm...
  • Page 14 ECN-380-QM87i Embedded System Specifications 2 x HDMI, 1 x VGA Display Resolution VGA: Up to 1920 x 1200@60Hz HDMI: Up to 2500 x 1600@60Hz Audio 1 x Line-out, 1 x Mic-in Wireless 802.1b/g/n 2T2R (optional) Expansions PCIe Mini 1 x Full-size PCIe Mini (Reserved for Wi-Fi)
  • Page 15: Front Panel

    ECN-380-QM87i Embedded System 1.5 Front Panel The ECN-380-QM87i front panel contains:  1 x HDD LED  1 x Power button  2 x RS-232 serial ports  2 x USB 2.0 ports An overview of the front panel is shown in Figure 1-2.
  • Page 16: Figure 1-3: Ecn-380-Qm87I Rear Panel

    ECN-380-QM87i Embedded System An overview of the rear panel is shown in Figure 1-3 below. Figure 1-3: ECN-380-QM87i Rear Panel Page 6...
  • Page 17: Dimensions

    ECN-380-QM87i Embedded System 1.7 Dimensions The physical dimensions are shown below: Figure 1-4: Physical Dimensions (mm) Page 7...
  • Page 18: Unpacking

    ECN-380-QM87i Embedded System Chapter Unpacking Page 8...
  • Page 19: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECN-380-QM87i. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ECN-380-QM87i or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
  • Page 20: Unpacking Checklist

    If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the ECN-380-QM87i from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw.
  • Page 21: Installation

    ECN-380-QM87i Embedded System Chapter Installation Page 11...
  • Page 22: Installation Precautions

    Electric shock and personal injury might occur if the rear panel of the ECN-380-QM87i is opened while the power cord is still connected to an electrical outlet.
  • Page 23: Figure 3-1: Hdd Cover Retention Screws

    ECN-380-QM87i Embedded System Figure 3-1: HDD Cover Retention Screws Step 2: Lift the HDD bracket out of the ECN-380-QM87i and attach the HDD to the HDD bracket. Figure 3-2: HDD Installation Page 13...
  • Page 24: Figure 3-3: Hdd Retention Screws

    ECN-380-QM87i Embedded System Step 3: Secure the HDD with the HDD bracket by four retention screws. Figure 3-3: HDD Retention Screws Step 4: Reinstall the HDD cover that was previously removed in the same position it was before. Page 14...
  • Page 25: So-Dimm Installation

    3.3 SO-DIMM Installation WARNING: Using incorrectly specified SO-DIMM may cause permanently damage the ECN-380-QM87i. Please make sure the purchased SO-DIMM complies with the memory specifications of the ECN-380-QM87i. To install a SO-DIMM into a SO-DIMM socket, please follow the steps below.
  • Page 26: Figure 3-5: So-Dimm Socket

    ECN-380-QM87i Embedded System Figure 3-5: SO-DIMM Socket Step 3: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a way that the notch in the middle of the SO-DIMM must be aligned with the plastic bridge in the socket (Figure 3-6).
  • Page 27: Pluggable Dc-In Terminal Block Installation

    ECN-380-QM87i Embedded System 3.4 Pluggable DC-In Terminal Block Installation To install the pluggable DC-in terminal block, please follow the steps below: Step 1: Locate the DC-in terminal block connector. Step 2: Align the pluggable DC-in terminal block with the DC-in terminal block connector on the ECN-380-QM87i.
  • Page 28: Mounting The System With Mounting Brackets

    ECN-380-QM87i Embedded System 3.5 Mounting the System with Mounting Brackets To mount the embedded system onto a wall or some other surface using the two mounting brackets, please follow the steps below. Step 1: Turn the embedded system over. Step 2: Align the two retention screw holes in each bracket with the corresponding retention screw holes on the sides of the bottom surface (Figure 3-8).
  • Page 29: Powering On/Off The System

    ECN-380-QM87i Embedded System 3.6 Powering On/Off the System WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user.
  • Page 30: Available Drivers

    ECN-380-QM87i Embedded System 3.7 Available Drivers All the drivers for the ECN-380-QM87i are available on IEI Resource Download Center (https://download.ieiworld.com). Type ECN-380-QM87i and press Enter to find all the relevant software, utilities, and documentation. Figure 3-10: IEI Resource Download Center 3.7.1 Driver Download...
  • Page 31 ECN-380-QM87i Embedded System Step 3: Click the driver file name on the page and you will be prompted with the  following window. You can download the entire ISO file ( ), or double click an  individual item to find its driver file and click the file name to download (...
  • Page 32: Ipmi Setup Procedure

    The ECN-380-QM87i features Intelligent Platform Management Interface (IPMI) that helps lower the overall costs of server management by enabling users to maximize IT resources, save time and manage multiple systems. The ECN-380-QM87i supports IPMI 2.0 through the optional iRIS-1010 module. Follow the steps below to setup IPMI.
  • Page 33: Bios

    ECN-380-QM87i Embedded System Chapter BIOS Page 23...
  • Page 34: Introduction

    ECN-380-QM87i Embedded System 4.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
  • Page 35: Getting Help

    ECN-380-QM87i Embedded System Function Decrease the numeric value or make changes Page Up key Move to the next page Page Dn key Move to the previous page Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu --...
  • Page 36 ECN-380-QM87i Embedded System  Save & Exit – Selects exit options and loads default settings. The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. Page 26...
  • Page 37: Main

    ECN-380-QM87i Embedded System 4.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
  • Page 38: Advanced

    ECN-380-QM87i Embedded System  System Overview The BIOS Information lists a brief summary of the BIOS. The fields in BIOS Information cannot be changed. The items shown in the system overview include:  BIOS Information  Processor Information  Memory Information ...
  • Page 39: Acpi Settings

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > ACPI Settings System ACPI Parameters > RTC Wake Settings > Trusted Computing > CPU Configuration ---------------------- > SATA Configuration : Select Screen...
  • Page 40: Rtc Wake Settings

    ECN-380-QM87i Embedded System  ACPI Sleep State [S1 only (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used.  S1 only (CPU Stop The system enters S1 (POS) sleep state. The...
  • Page 41: Trusted Computing

    ECN-380-QM87i Embedded System  Wake system with Fixed Time [Disabled] Use the Wake system with Fixed Time option to enable or disable the system wake on alarm event.  Disabled The real time clock (RTC) cannot generate a wake EFAULT event ...
  • Page 42: Bios Menu 5: Trusted Computing

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Configuration Enables or Disables BIOS Security Device Support [Disable] support for security device. O.S. will not Current Status Information show Security Device. NO Security Device Found...
  • Page 43: Cpu Configuration

    ECN-380-QM87i Embedded System 4.3.4 CPU Configuration Use the CPU Configuration menu (BIOS Menu 6) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced CPU Configuration Enabled for Windows XP and Linux (OS optimized Intel(R) Core(TM) i5-4400E CPU @ 2.70GHz...
  • Page 44 ECN-380-QM87i Embedded System  Intel HT Technology: Indicates if Intel HT Technology is supported by the CPU.  Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the CPU.  Intel SMX Technology: Indicates if Intel SMX Technology is supported by the CPU.
  • Page 45: Sata Configuration

    ECN-380-QM87i Embedded System  Disabled Disables Intel Virtualization Technology. EFAULT  Enables Intel Virtualization Technology. Enabled  EIST [Enabled] Use the EIST option to enable or disable the Intel Speed Step Technology.  Disabled Disables the Intel Speed Step Technology.
  • Page 46: Intel(R) Rapid Start Technology

    ECN-380-QM87i Embedded System  SATA Controller(s) [Enabled] Use the SATA Controller(s) option to configure the SATA controller.  Enable SATA controller. Enabled EFAULT  Disable SATA controller. Disabled  SATA Mode Selection [IDE] Use the SATA Mode Selection option to configure SATA devices.
  • Page 47: Amt Configuration

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Intel(R) Rapid Start Technology [Disabled] Enable or disable Intel(R) Rapid Start Technology --------------------- : Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. General Help...
  • Page 48: Bios Menu 9: Amt Configuration

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Intel AMT [Enabled] Enable/Disable Intel (R) Un-Configure ME [Disabled] Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution.
  • Page 49: Usb Configuration

    ECN-380-QM87i Embedded System 4.3.8 USB Configuration Use the USB Configuration menu (BIOS Menu 10) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB support.
  • Page 50: Iwdd H/W Monitor

    ECN-380-QM87i Embedded System  Enabled Legacy USB support enabled EFAULT  Legacy USB support disabled Disabled  Auto Legacy USB support disabled if no USB devices are connected 4.3.9 iWDD H/W Monitor The iWDD H/W Monitor menu (BIOS Menu 11) displays the CPU temperature and CPU fan speed, and contains the fan configuration submenu.
  • Page 51: Bios Menu 12: Smar Fan Mode Configuration

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Smart Fan Mode Configuration Smart Fan Mode Select CPU_FAN1 Smart Fan Control [Auto Mode] Auto mode fan start temperature 50 Auto mode fan off temperature --------------------- Auto mode fan start PWM : Select Screen...
  • Page 52: F81866 Super Io Configuration

    ECN-380-QM87i Embedded System  Auto mode fan slope PWM Use the + or – key to change the Auto mode fan slope PWM value. Enter a decimal number between 1 and 64. 4.3.10 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu (BIOS Menu 13) to set or change the configurations for the serial ports.
  • Page 53: Serial Port N Configuration

    ECN-380-QM87i Embedded System 4.3.10.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 14) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Serial Port n Configuration Enable or Disable Serial...
  • Page 54: Serial Port 2 Configuration

    ECN-380-QM87i Embedded System  IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3, 4  Serial Port I/O port address is 2F8h and the interrupt IO=2F8h; address is IRQ3, 4 IRQ=3, 4 ...
  • Page 55: Serial Port 3 Configuration

    ECN-380-QM87i Embedded System  IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=3, 4 address is IRQ3, 4 4.3.10.1.3 Serial Port 3 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.
  • Page 56: F81866 H/W Monitor

    ECN-380-QM87i Embedded System 4.3.11 F81866 H/W Monitor The F81866 H/W Monitor menu (BIOS Menu 15) displays the system temperature and voltages. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced PC Health Status System temperature : +40 C +VCC_CORE : +1.720 V...
  • Page 57: Bios Menu 16: Serial Port Console Redirection

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced COM1 Console Redirection Console Redirection [Disabled] Enable or Disable > Console Redirection Settings COM2 Console Redirection [Disabled] --------------------- : Select Screen > Console Redirection Settings ↑ ↓: Select Item...
  • Page 58 ECN-380-QM87i Embedded System  VT100+ The target terminal type is VT100+  The target terminal type is VT-UTF8 VT-UTF8  ANSI The target terminal type is ANSI EFAULT  Bits per second [115200] Use the Bits per second option to specify the serial port transmission speed. The speed must match the other side.
  • Page 59 ECN-380-QM87i Embedded System  Mark The parity bit is always 1. This option does not provide error detection.  The parity bit is always 0. This option does not Space provide error detection.  Stop Bits [1] Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet.
  • Page 60: Iei Feature

    ECN-380-QM87i Embedded System 4.3.13 iEi Feature Use the iEi Feature menu (BIOS Menu 17) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function...
  • Page 61: Bios Menu 18: Chipset

    ECN-380-QM87i Embedded System WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit >...
  • Page 62: Pch-Io Configuration

    ECN-380-QM87i Embedded System 4.4.1 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 19) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Auto Power Button Status [Disable (ATX)] Select AC power state...
  • Page 63: Pci Express Configuration

    ECN-380-QM87i Embedded System  Disabled The onboard High Definition Audio controller is disabled  onboard High Definition Audio controller Enabled EFAULT automatically detected and enabled  Power Saving Function [Disabled] Use the Power Saving Function option to enable or disable power saving function.
  • Page 64: Bios Menu 20: Pci Express Configuration

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset PCI Express Configuration Select PCI Express port speed. M-SATA1 PCIE Port PCIe Speed [Auto] Detect Non-Compliance Device [Disabled] ---------------------- : Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.
  • Page 65: System Agent (Sa) Configuration

    ECN-380-QM87i Embedded System 4.4.2 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 21) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset VT-d Capability Supported Check to enable VT-d...
  • Page 66: Bios Menu 22: Graphics Configuration

    ECN-380-QM87i Embedded System Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Graphics Configuration Select which of Primary Display [Auto] IGFX/PEG/PCI Graphics DVMT Pre-Allocated [256M] device should be Primary DVMT Total Gfx Mem [MAX] Display Or select SG for Switchable Gfx.
  • Page 67 ECN-380-QM87i Embedded System  DVMT Total Gfx Mem [MAX] Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used by the internal graphic device. The following options are available:  128M  256M  Default ...
  • Page 68: Memory Configuration

    ECN-380-QM87i Embedded System 4.4.2.2 Memory Configuration Use the Memory Configuration submenu (BIOS Menu 23) to view memory information. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Memory Information Memory Frequency 1600 Mhz Total Memory 4096 MB (DDR3)
  • Page 69: Boot

    ECN-380-QM87i Embedded System 4.5 Boot Use the Boot menu (BIOS Menu 24) to configure system boot options. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Select the keyboard...
  • Page 70 ECN-380-QM87i Embedded System  Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.  Normal POST messages displayed Disabled  OEM Logo displayed instead of POST messages Enabled EFAULT  Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode.
  • Page 71: Security

    ECN-380-QM87i Embedded System 4.6 Security Use the Security menu (BIOS Menu 25) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set,...
  • Page 72: Save & Exit

    ECN-380-QM87i Embedded System 4.7 Save & Exit Use the Save & Exit menu (BIOS Menu 26) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main...
  • Page 73: Regulatory Compliance

    ECN-380-QM87i Embedded System Appendix Regulatory Compliance Page 63...
  • Page 74 ECN-380-QM87i Embedded System DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive 2014/30/EU  Low-Voltage Directive 2014/35/EU  RoHS II Directive 2015/863/EU If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 75 ECN-380-QM87i Embedded System Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ...
  • Page 76 ECN-380-QM87i Embedded System Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
  • Page 77 ECN-380-QM87i Embedded System FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  This device must accept any interference received, including interference that may cause undesired operation.
  • Page 78: Safety Precautions

    ECN-380-QM87i Embedded System Appendix Safety Precautions Page 68...
  • Page 79: Safety Precautions

    Drop the system against a hard surface. In a site where the ambient temperature exceeds the rated temperature B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the ECN-380-QM87i result permanent damage ECN-380-QM87i and severe injury to the user. Page 69...
  • Page 80: Product Disposal

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECN-380-QM87i. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ECN-380-QM87i is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
  • Page 81: Maintenance And Cleaning Precautions

    Some components in the ECN-380-QM87i may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the ECN-380-QM87i. Page 71...
  • Page 82 ECN-380-QM87i as they may damage the plastic parts.  Vacuum cleaner – Using a vacuum specifically designed for computers is one of the best methods of cleaning the ECN-380-QM87i. Dust and dirt can restrict the airflow in the ECN-380-QM87i and cause its circuitry to corrode. ...
  • Page 83: Watchdog Timer

    ECN-380-QM87i Embedded System Appendix Watchdog Timer Page 73...
  • Page 84 ECN-380-QM87i Embedded System NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
  • Page 85 ECN-380-QM87i Embedded System NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE PROGRAM: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
  • Page 86: D Hazardous Materials Disclosure

    ECN-380-QM87i Embedded System Appendix Hazardous Materials Disclosure Page 76...
  • Page 87: Rohs Ii Directive (2015/863/Eu)

    ECN-380-QM87i Embedded System D.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).
  • Page 88: China Rohs

    ECN-380-QM87i Embedded System D.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 78...

Table of Contents