Canon LBP-5100 User Manual page 462

6
Set the DIP switches.
Set the DIP switches with the tip of a ball-point pen etc. For details on methods
for setting the DIP switches, see the table of p. 8-26.
IMPORTANT
When setting the DIP switches, be careful not to damage the main board with the
tip of a ball-point pen etc. Do not use a sharp object such as a mechanical pencil.
7
Insert the network board into the expansion slot.
Hold the metal panel portions of the network board and insert the board straight
while aligning it with the guide rails inside the expansion slot.
IMPORTANT
• Do not touch the network board parts, printed wire, or connectors with your hands.
• Insert the network board securely.
DIP switches
1
OFF
1 0 0
L N K
E R R
ON
2 3 4
OFF
Network Board
8
8-27