Canon LBP-5100 User Manual page 467

1
2
3
4
5
6
8
7
8
9
8-32 Network Board
Turn the printer OFF.
If a USB cable is connected, turn the computer off, and then
disconnect the USB cable.
Disconnect the power plug from the AC power outlet.
Remove all the interface cables and the power cord from the
printer.
Remove the two screws and remove the network board.
Store the network board in the protective bag that it came in.
IMPORTANT
• Do not touch the network board parts, printed wire, or connectors with your hands.
• The removed two screws are required when the network board is installed. Keep
them where they will not get lost.
Attach the protective plate to the expansion slot and secure it
with the screws.
Connect the interface cables except for the USB cable, and
connect the power cord.
Plug the power plug into the AC power outlet.
Connect the USB cable.