Turning The Printer On/Off; Turning The Printer On - Canon LBP-5100 User Manual

Turning the Printer ON/OFF

The power switch to turn the printer ON or OFF is located on the back of the printer.
Be sure to observe the following instructions in order to prevent unexpected
problems.
2

Turning the Printer ON

In order to use this printer, you should press " " of the power switch to turn the
printer ON. After running a self-diagnostic test on the printer unit and optional
accessories, the printer will be ready to print.
IMPORTANT
• Do not turn the power ON immediately after turning it OFF. If you want to turn the printer
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF
before turning it ON again.
• If the printer does not operate properly, or an error message appears in the Printer Status
Window, see "Troubleshooting," on p. 7-1.
• When turning the power ON, make sure that no paper is loaded in the manual feed slot. If
the power is turned ON when any paper is loaded in the manual feed slot, this may result
in paper jams.
• Although a sheet of blank paper is output when you turn the power ON for the first time
after you install the printer, this is not an error.
1
2-36

Turning the Printer ON/OFF

Press " " of the power switch on the printer.