Canon LBP-5100 User Manual page 407

IMPORTANT
Normally, use the printer with [Special Print Mode] set to [Off]. Set [Special Print Mode] to
[Special Settings 6] only when this problem occurs.
Outlines in the areas dense in color are emphasized.
Cause
Remedy
IMPORTANT
Normally, use the printer with [Special Print Mode] set to [Off]. Set [Special Print Mode] to
[Special Settings 7] only when this problem occurs.
A portion of a page is not printed.
Cause 1
Remedy 1 Clear the [Manual Scaling] check box in the printer driver. If the check box is
7
Remedy 2 Select the [Manual Scaling] check box in the printer driver, then specify an
Cause 2
Remedy
Cause 3
Remedy 1 Data cannot be printed within a 5 mm margin (10 mm for envelopes (7.6 mm for
7-30 Print Quality Problems
Depending on the print data, outlines in the areas dense in color are sometimes
emphasized.
Set [Special Print Mode] to [Special Settings 7] in the printer driver.
In order to specify the setting for [Special Print Mode], display the [Advanced
Settings] dialog box by clicking [Finishing Details] in the [Finishing] sheet, and
then clicking [Advanced Settings] in the [Finishing Details] dialog box.
The scale factor is incorrect.
cleared, the scale factor will be set according to [Page Size] and [Output Size]
automatically.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
appropriate scale factor according to the paper size to be used.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
The position of the paper is incorrect.
Load the paper properly. (See "Loading Plain Paper, Heavy Paper,
Transparencies, or Labels in the Paper Source," on p. 3-17, "Loading Index
Card Size Media in the Paper Source," on p. 3-29, "Loading Envelopes in the
Paper Source," on p. 3-40, "Loading Custom Size Paper (Non-Standard Paper)
or Paper at a Size of Statement, Foolscap, or 16K in the Paper Source," on p.
3-51)
A document with no margins was printed.
the right margin)) on all sides of the paper. Secure a margin around the data.