Canon LBP-5100 User Manual page 221

■ Configuring Windows Firewall
If you are using Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall as the print server, you need to configure Windows Firewall to allow
communication with the client computers.
Use the following procedure to ensure that Windows Firewall does not block this
communication.
4
• If you installed the CAPT software from CD-ROM Setup, a [Warning] dialog box was
displayed.
- If you clicked [Yes], Windows Firewall was configured to allow communication with the
client computers.
- If you clicked [No], however, Windows Firewall was configured to block communication
with the client computers, and you will need to use the following method to clear that
block.
1. From the [Start] menu, select [Control Panel], and then click [Network and Internet
Connections] ➞ [Windows Firewall].
4-62 Printing from a Network Computer by Sharing the Printer on a Network
IMPORTANT
To clear the printer sharing settings, select [Do not share this printer] ([Not shared]
for Windows 2000) in the [Sharing] sheet. If you cleared the printer sharing settings
with Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall, you need to delete the settings registered in Windows Firewall
using the utility software. (See p. 9-15)