Canon LBP-5100 User Manual page 457

3
4
8
8-22 Network Board
Remove the screws and remove the protective plate for the
expansion slot.
IMPORTANT
The removed protective plate and screws are required when the network board is
removed. Keep them where they will not get lost.
Insert the network board into the expansion slot in the
orientation shown in the figure.
Hold the metal panel portions of the network board and insert the board straight
while aligning it with the guide rails inside the expansion slot.
IMPORTANT
• Do not touch the network board parts, printed wire, or connectors with your hands.
• Insert the network board securely.