Federal Communication Commission (Fcc) Compliance - CapsoVision CapsoAccess CDAS3 Instructions For Use Manual

incomplete or corrupted which will require
redownload.
11. Federal Communication
Commission (FCC)
Compliance
The CapsoAccess® system (CDAS3) complies
with Part 15 of the United States FCC rules and
with international standards for electromagnetic
compatibility regarding its use.
Table 1 — Guidance and manufacturer' s declaration – electromagnetic emissions
The CapsoAccess® system is intended for use in the electromagnetic environment specified below.
The customer or the user of the CapsoAccess® system should assure that it is used in such an environment.
Emissions Test Compliance
RF emissions
Group 1
CISPR 11
RF emissions
Class B
CISPR 11
Harmonic emissions
Class A
IEC 61000-3-2
Voltage fluctuations/
flicker emissions Complies
IEC 61000-3-3
Electromagnetic environment – guidance
The CapsoAccess® system uses RF energy only for its internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby electronic equipment.
The CapsoAccess® system is suitable for use in all establishments, including domestic establishments and
those directly connected to the public low voltage power supply network that supplies buildings used for
domestic purposes.
IFU-2800 Ref F 03/2020
9