Installation - CapsoVision CapsoAccess CDAS3 Instructions For Use Manual

5. Installation

Connect the power cable (3) to the supplied
AC adapter (2).
Connect the AC adapter (2) to the 12V DC input
of the CapsoAccess® Capsule Data Access
System (1).
Connect the power cable (3) to an outlet rated
for a voltage between 110 and 240V AC.
Attach the USB cable (4) to the USB input of the
CapsoAccess® Capsule Data Access System (1).
Connect the other end of the USB cable (4) to
the computer with the CapsoView® software
and the required USB driver installed.
IFU-2800 Ref F 03/2020
5