10. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not
fully close (lock indicator still RED),
open the LockStrong and try
loosening the LATCH/UAS strap
slightly.
11. Pull the Tether Adjuster Strap to
tighten.
12. Install Seat Shell to Base (pg.
57), move seat to most reclined
position and rotate
FACING, then lock into position.
13. Confirm that the seat is in a
locked position by checking that
the Seat Lock Indicator is GREEN.
Booster Mode (Forward-Facing Only)
Installing the Booster
FORWARD-
97
Need help?
Do you have a question about the Revolve360 Extend and is the answer not in the manual?