Evenflo Revolve360 Extend Owner's Manual page 82

8. The vehicle lower anchors must be
as tight as possible. Using your full
weight, push the Base firmly into the
vehicle seat as you tighten the lower
anchors.
9. Tension LATCH/UAS Strap by
pulling on loop until snug.
10. After tightening LATCH/UAS, secure
excess strap under the LockStrong.
11. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not fully
close (lock indicator still RED), open
the LockStrong and try loosening the
LATCH/UAS strap slightly.
82
LATCH/UAS (Rear-Facing and Forward-Facing)
Installing LATCH/UAS