Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
8. Secure lap portion of belt under
tabs in blue belt path guide, then
pull up on shoulder belt from
center of base to remove slack.
9. Secure shoulder portion of belt
under tabs in blue belt path guide
and apply pressure to fully close
the LockStrong. The Belt Lock
indicator will turn GREEN when
fully closed.
NOTE: If belt tensioner does not
fully close (Belt Lock indicator still
RED), open the LockStrong and
try loosening the lap/shoulder belt
strap slightly.
NEVER place any part of vehicle
belt over LockStrong, even in a
vehicle with longer Buckle Stalks.
Installing Lap/Shoulder Belt (Preferred Method)
61
Need help?
Do you have a question about the Revolve360 Extend and is the answer not in the manual?